ASI Instrumentation (M) Sdn Bhd

CS MP programmed multifunction modules

Programmable modules for safety functions Programming and Development Software dedicated to Gemnis Studio Suitable to provide circuit solutions at SIL3 (EN 62061), PLe (EN ISO 13849-1) or category 4 (EN ISO 13849-1) levels

CS MF pre-programmed multifunction modules

Pre-programmed modules for specific applications or for generic safety macro-functions No software to be installed and managed, products immediately operative Suitable to provide circuit solutions at SIL3 (EN 62061), PLe (EN 13849) or category 4 (EN 954-1) levels

Expansion modules CS ME with istantaneous contacts or delayed co

Usable for the expansion of the safety modules contacts Delayed contacts at de-energizing versions (up to 12 sec.) Small housing, screw or spring terminals

Standstill monitor safety modules CS AM

Residual voltage at motor-stop selectable on 10 position. 24 ... 230 Vac/dc supply voltages Possibility to connect single-phase or three phase motors to measuring circuits. 45 mm housing, screw or spring terminals

Safety modules CS DM for synchronism control or bimanual control

Certificated for bimanual control device type IIIC 24 Vac/dc; 120 Vac; 230 Vac power supply Small housing, screw or spring terminals

Safety timer modules CS FS

Fixed time or adjustable time versions, delay on or delay off 24 Vac/dc;120 Vac;230 Vac power supply 45 mm housing, screw or spring terminals

Safety modules CS AT for emergency stop and gate monitoring wi

Single or dual channel input circuit, 24 Vac/dc; 120 Vac; 230 Vac power supply SIL level up to SIL 3 according to EN IEC 62061, Performance Level (PL) up to PL e according to EN ISO 13849-1and safety category up to category 4 according to EN 954-1 Fixed time or adjustable time versions 45 mm housing, screw or spring terminals

Safety modules CS AR-51 for emergency stop, gate monitoring, saf

Dual channel input circuit, 24 Vac/dc power supply SIL level up to SIL 3 according to EN IEC 62061, Performance Level (PL) up to PL e according to EN ISO 13849-1and safety category up to category 4 according to EN 954-1 Automatic, monitored or manual start versions Connectible to electromechanical contacts, to safety mats or to safety edges Small housing, screw or spring terminals Output contacts: 2 NO safety contacts

Safety modules CS AR for emergency stop and gate monitoring

Single or dual channel input circuit, 24 Vac/dc; 120 Vac; 230 Vac; 10 ... 30 Vdc power supply SIL level up to SIL 3 according to EN IEC 62061, Performance Level (PL) up to PL e according to EN ISO 13849-1and safety category up to category 4 according to EN 954-1 Automatic, monitored or manual start versions Versions with inputs proper to control electromechanical contacts, electrosensible devices with PNP output, safety magnetic sensor and safety mats and bumpers with 4 wires technology. Small housing, screw or spring terminals Several combination of output contacts